激光跟踪仪在核电站主管道安装中的应用     

郭建兵 《北京测绘》2020,(1):123-125

目前,核电站的主管道焊接越来越多的采用了自动焊技术,这有利于提高焊接质量效率,还可以压缩建设成本。然而,主管道自动焊对焊缝的限差较现有工艺要求更高,高精度的测量是实现主管道自动焊的必要条件之一。本文针对主管道自动焊管口组队高精度的技术要求,提出采用激光跟踪仪对主管道自动焊相关的设备进行更为精密的三维工业测量,通过理论技术评定测量精度,然后选择测量仪器和编制具体的测量方案,最终保证了主管道自动焊精确组对的实现。  相似文献   

复杂地形景区三维导览图的设计与实现     

吴思锴  李百寿  郭家豪  李雪  张卫平 《北京测绘》2020,(1):38-43

为满足复杂地形景区对三维地图导览的需求,构建更为清晰的三维地图模型,提供良好的三维导览地图设计方案显得尤为重要。为了更好地与卫星影像进行贴合,DEM数据的采样密度要与卫星影像的分辨率一致。本文通过对比当下常用的四种空间插值方法的适用范围与运用特点,设置相关阈值及权重,直观比较了四种插值方法产生的插值结果,选择更适合复杂景区DEM插值的插值方法并对其进行精度提升,以此得到符合精度要求的DEM数据。最后利用相应地区的卫星影像进行地图投影及影像贴图,两种数据结合构建复杂景区的三维地图模型,给游客带来更为精确直观的定位信息和空间要素信息。  相似文献   

Transcriptomic analysis reveals the effect of the exopolysaccharide of Psychrobacter sp. B-3 on gene expression in RAW264.7 macrophage cells     

ZHANG Pingping  LI Jiang  YU Leiye  WEI Jingfang  XU Tong  SUN Guojie 《海洋学报(英文版)》2018,(8)

  相似文献   

铜藻(Sargassum horneri)在营养限制胁迫后对NH₄-N的超补偿吸收研究     

李大鹏  马增岭  李慧  丁刚  辛美丽  吴海一  郭文 《海洋与湖沼》2018,49(4):904-909

以经济马尾藻铜藻(Sargassum horneri)为研究材料,研究了其在营养限制胁迫后对NH_4-N的超补偿吸收情况。实验分营养限制和恢复营养两个阶段进行,每个阶段均设置饥饿处理组、饱和处理组和正常对照组。铜藻在低营养限制胁迫(饥饿)下培养10天后,恢复营养盐培养3天,分别采用次溴酸盐氧化法和锌镉还原法测定培养液中的NH_4-N和NO_3-N的浓度。本文研究发现,饥饿处理组中铜藻吸收氨氮的速率远高于正常对照组和饱和处理组,在恢复培养第一天时,饥饿处理组对NH_4-N的吸收速率最高为14.94μmol/(g·h),与正常对照组及饱和处理组间差异显著。在恢复培养的后两天,三个处理组中铜藻对NH_4-N的吸收速率差异慢慢变小,直至最后几乎相同。三组对NO_3-N没有表现出较高的吸收,最高仅为6.15μmol/(g·h),结果表明:氮源包括NH_4-N和NO_3-N时,铜藻优先选择吸收NH_4-N。实验后称重测定生长速率:对照组、饥饿处理组和饱和组生长率(SGR)分别为8.48%、8.86%、8.01%,ANOVA方差分析表明,三者存在显著差异(P=0.0320.05),从而证实了铜藻也存在超补偿生长的现象。  相似文献   

Assessment of alternative adsorption models and global sensitivity analysis to characterize hexavalent chromium loss from soil to surface runoff          下载免费PDF全文

Chuan‐An Xia  Juxiu Tong  Bill X. Hu  Xiujie Wu  Alberto Guadagnini 《水文研究》2018,32(20):3140-3157

We investigate our ability to assess transfer of hexavalent chromium, Cr(VI), from the soil to surface runoff by considering the effect of coupling diverse adsorption models with a two‐layer solute transfer model. Our analyses are grounded on a set of two experiments associated with soils characterized by diverse particle size distributions. Our study is motivated by the observation that Cr(VI) is receiving much attention for the assessment of environmental risks due to its high solubility, mobility, and toxicological significance. Adsorption of Cr(VI) is considered to be at equilibrium in the mixing layer under our experimental conditions. Four adsorption models, that is, the Langmuir, Freundlich, Temkin, and linear models, constitute our set of alternative (competing) mathematical formulations. Experimental results reveal that the soil samples characterized by the finest grain sizes are associated with the highest release of Cr(VI) to runoff. We compare the relative abilities of the four models to interpret experimental results through maximum likelihood model calibration and four model identification criteria (i.e., the Akaike information criteria [AIC and AIC_C] and the Bayesian and Kashyap information criteria). Our study results enable us to rank the tested models on the basis of a set of posterior weights assigned to each of them. A classical variance‐based global sensitivity analysis is then performed to assess the relative importance of the uncertain parameters associated with each of the models considered, within subregions of the parameter space. In this context, the modelling strategy resulting from coupling the Langmuir isotherm with a two‐layer solute transfer model is then evaluated as the most skilful for the overall interpretation of both sets of experiments. Our results document that (a) the depth of the mixing layer is the most influential factor for all models tested, with the exception of the Freundlich isotherm, and (b) the total sensitivity of the adsorption parameters varies in time, with a trend to increase as time progresses for all of the models. These results suggest that adsorption has a significant effect on the uncertainty associated with the release of Cr(VI) from the soil to the surface runoff component.  相似文献   

Regional Characteristics and Causes of Haze Events in Northeast China     

Weiwei Chen  Shichun Zhang  Quansong Tong  Xuelei Zhang  Hongmei Zhao  Siqi Ma  Aijun Xiu  Yuexin He 《中国地理科学(英文版)》2018,28(5):836-850

Northeast China experiences severe atmospheric pollution, with an increasing occurrence of heavy haze episodes. However, the underlying forces driving haze formation during different seasons are poorly understood. In this study, we explored the spatio-temporal characteristics and causes of haze events in Northeast China by combining a range of data sources(i.e., ground monitoring, satellite-based products, and meteorological products). It was found that the ‘Shenyang-Changchun-Harbin(SCH)'city belt was the most polluted area in the region on an annual scale. The spatial distribution of air quality index(AQI) values had a clear seasonality, with the worst pollution occurring in winter, an approximately oval-shaped polluted area around western Jilin Province in spring, and the best air quality occurring in summer and most of the autumn. The three periods that typically experienced intense haze events were Period I from mid-October to mid-November(i.e., late autumn and early winter), Period II from late-December to February(i.e., the coldest time in winter), and Period III from April to mid-May(i.e., spring). During Period I, strong PM_(2.5) emissions from seasonal crop residue burning and coal burning for winter heating were the dominant reasons for the occurrence of extreme haze events(AQI 300). Period II had frequent heavy haze events(200 AQI 300) in the coldest months of January and February, which were due to high PM_(2.5) emissions from coal burning and vehicle fuel consumption, a lower atmospheric boundary layer, and stagnant atmospheric conditions. Haze events in Period III, with high PM_(10) concentrations, were primarily caused by the regional transportation of windblown dust from degraded grassland in central Inner Mongolia and bare soil in western Jilin Province. Local agricultural tilling could also release PM_(10) and enhance the levels of windblown dust from tilled soil. Better control of coal burning, fuel consumption, and crop residue burning in winter and autumn is urgently needed to address the haze problem in Northeast China.  相似文献   

面向稀疏散布数据集的时空Kriging优化     

杨明远  刘海砚  季晓林  郭文月  陈思雯 《地球信息科学学报》2018,20(4):505-514

时空Kriging法通过将变异函数向时空域进行扩展得到时空变异函数,有效地利用时空邻近的采样点综合进行插值,由于时空稀疏散布数据集具有单一时刻下样本点数量少以及时空分布不规律的特点,难以满足使用时空Kriging插值法的基本条件,导致插值精度不高,据此本文提出了优化方法：通过多时段叠置拟合空间变异函数的方法,综合利用时空邻域内的采样点以解决单一时刻下空间邻域内数量不足情况;控制时间变异对空间变异函数拟合的误差影响;采用积合式模型构建时空变异函数进行插值。最后使用Argo海温数据进行插值实验,在相同条件下与时空Kriging法以及时空权重法的交叉验证结果对比得出,该方法在保证拟合所需采样点数量要求的同时,有效削减了一般时空Kriging法中时间变异对空间变异函数拟合结果的干扰,插值结果的绝对误差均值从0.5降低至0.2以内,稳定性进一步增强,改善了时空Kriging法在稀疏散布数据条件下精度上的不足。  相似文献   

利用短期静态PPP结果反演海潮负荷位移     

魏国光  王琪洁  彭葳  郭良琦 《大地测量与地球动力学》2019,39(6):607-612

采用香港11个GPS测站的观测资料进行1 h、2 h、3 h和4h静态PPP解算，获得4组PPP坐标序列，利用调和分析求取11个测站处8个主要分潮的负荷位移参数（振幅和相位），将其与海潮模型计算的负荷位移参数进行对比，并比较分析PPP反演值与海潮模型值改正海潮负荷信号的效果。结果表明，垂直和水平方向上，不同PPP结果反演8个分潮的负荷位移分别具有约5 mm和7 mm的差异；PPP反演8个分潮垂向负荷位移优于全球海潮模型，但水平方向上的反演效果稍弱。  相似文献   

基于熵权TOPSIS模型的海岛地区资源环境承载力研究——以舟山普陀区、定海区为例   总被引：2，自引：0，他引：2  

徐文斌  郭灿文  王晶  程义远  徐鹏杰  张宏晔 《海洋通报》2018,(1):9-16

随着海洋强国、"一带一路"、生态文明建设等国家战略的不断推进,海岛在国家政治、军事、经济、社会、生态中的地位不断提高,海岛开发、利用的规模越来越大,其生态保护也面临着新的挑战。本文依据资源环境承载力内涵,兼顾海岛资源环境特点,研究形成海岛地区资源环境承载力评价指标体系,综合应用熵权法、TOPSIS(逼近理想解排序方法)模型评价了典型海岛地区——普陀区与定海区2009-2015年间的资源环境承载力状况,结果表明:普陀和定海资源环境承载力水平呈稳步提升趋势,各个时期的环境保护政策和节能减排相关措施在环境保护与污染治理等方面起到了较为积极的作用。最后,在基于生态系统的海岛综合管理框架内提出了对策建议。  相似文献   

Fe₃O₄/Mg(OH)₂复合材料的制备及形貌控制          下载免费PDF全文

韩文生  李丽娟  宋富根  时东  张禹泽  李娜  郭凡 《盐湖研究》2020,28(3):93-98

通过种子沉积法制备出Fe_3O_4/Mg(OH)_2复合材料并进行XRD、SEM测试分析。探究了氨水的浓度与加入速度、搅拌速度及等因素对磁性复合材料形貌的影响。氨水浓度与注入速度的降低,对氢氧化镁基体形貌的影响是相同的,但要使合成磁性复合材料形貌和四氧化三铁粒子在氢氧化镁中分散性均匀,应控制氨水浓度(ω=2.5%)或加入速度在一个合理的较低值。  相似文献